Comware

 View Only
Back to discussions
Expand all | Collapse all

hp 1910 vs hp 1920 switch and packet filtering

This thread has been viewed 0 times

  • 1.  hp 1910 vs hp 1920 switch and packet filtering

    Posted Jan 23, 2016 03:57 AM

    hello

    i have a hp 1920-24g swtich. via the cmdline I don't seem to have the packet-filter command available on vlan interfaces. it is only available on gigabit ethernet interfaces. I want to apply an acl to the whole VLAN not just specific interfaces.

     

    can someone with a hp 1910 advise if the packet-filter command is available to them on vlan interfaces? some posts on the web indicate it might be

     

    it would make applying my acls so much easier than attempting to use these, classifers, behaviors and policies etc etc.

     

    thanks



  • 2.  RE: hp 1910 vs hp 1920 switch and packet filtering

    Posted Mar 13, 2016 11:26 AM

    Hi, 

    can you verify availability of packetfilter on vlan via port assignement? I have tried it several times on web gui but failed. 'not supported by hardware'



Related Content