Become a Member
The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.hpe.com for current and complete HPE Aruba Networking product lines and names.
Hello, I'm sorry for the late reply. The Python code you initially provided didn't run, so I made some modifications and got it ...
Enable QoS globally: qos global enable Trust DSCP or 802.1p on ingress: interface GigabitEthernet1/0/x qos trust dscp ...
I have two (JQ076A) HPE 5945 4-SLOT SWITCH as Core Switches in a critical customer. What is the EoSL for these JQ076A (5945 ...
Hi, isn't the port fec mode none (on desired interface) what you are looking for? in any case, if disabled, it should be disabled ...
I am having some problem transporting Layer 2 protocols for customer across our network. The network is simple CE1<--> PE1<---->PE2<--->CE2. ...
I pasted the original config.
You can try and visit https://networkingsupport.hpe.com/ and see if that is helpful. ------------------------------ Shpat ...
Default IP for HPE OfficeConnect 1920s is 192.168.1.1 after factory reset. You should give your laptop any ip address on 192.168.1.x/24 ...
Since you're dealing with SW1+SW2 on a Room and SW3+SW4 on another one...it all boils down to understand what are your networking ...
You can ignore this one. I accidentally posted it 2 times under different accounts because it didn't post this one the first ...