Wired Intelligent Edge

I've been looking at switches to upgrade our network with.

The two major things I've been looking for are:

802.1Q - Vlan Tagging. We need a switch that can handle at least 10 VLANs. It appears that the 2510G handles at least 64.

802.3ad - We have several servers that I'd like to bond the ethernet connections so we have more bandwidth to. I'm aware that both switches are limited to 24 trunks total with a maximum of 8 trunks in a group.


The only major difference I could find between the 2510 and the 2810 is the 2810 has the option to add a redundant power supply. Are there any other differences? ---- If not, I think I'll save the $800 difference and get the 2510.

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp Forum Modertor

http://h30499.www3.hp.com/t5/Switches-Hubs-Modems-Legacy-ITRC/difference-between-the-new-2510G-and-2810-models/m-p/5141808#M28501

Hi,

2810 is also more performant than 2510, so if you are looking for Highspeed Gigabit connection this is the first choice.

Bye.

The performance figures quoted on the specification page are identical 71.4 million pps/<5.6us latency.