Hi all, I am trying to trunk my VLAN(s) to my Cisco 2621 router but I can't get the default VLAN to trunk over.
This is a quick overview of how my VLAN(s) are setup on my switch
VLAN Name
1 - Default (IP 172.16.1.1) (untagged 21-23) (no untagged 1-20, TRK24) -> port 24 is used to trunk
10 - E (NO IP) (untagged 1-4) (tagged trk24)
20 - J (NO IP) (untagged 5-8) (tagged trk24)
30 - S (NO IP) (untagged 9-12) (tagged trk24)
40 - P (NO IP) (untagged 13-15) (tagged trk24)
50 - Servers (NO IP) (untagged 17-20) (tagged trk24)
All the DHCP and sub interfaces are configured on my Cisco router he is a sample of how the networks look like.
VLAN 1 - 172.16.1.0 /24
VLAN 10 - 172.16.10.0 /24 (DHCP)
VLAN 20 - 172.16.20.0 /24 (DHCP)
VLAN 30 - 172.16.30.0 /24 (DHCP)
VLAN 40 - 172.16.40.0 /24 (DHCP)
VLAN 50 - 172.16.50.0 /24
This is how the trunking looks like on the Cisco router
FA0/1 - no ip address, no shutdown
FA0/1.1 - IP 172.16.1.254, encap dot1q 1 native
FA0/1.10 - IP 172.16.10.254, encap dot1q 10
FA0/1.20 - IP 172.16.20.254, encap dot1q 20
FA0/1.30 - IP 172.16.30.254, encap dot1q 30
FA0/1.40 - IP 172.16.40.254, encap dot1q 40
FA0/1.50 - IP 172.16.50.254, encap dot1q 50
All the static port VLAN(s) work fine for example if I plug in my laptop to port 1 its going to be tagged with a VLAN ID of 10 and assigns me a DHCP address of 172.16.10.1.
BUT on my switch I CAN'T ping my router so when I ping 172.16.1.254 coming form 172.16.1.1 (default vlan), no response.
When I plug in my laptop into port 23 (untagged VLAN1) and set an IP of 172.16.1.5 I CAN ping my switch and access the web interface BUT I can't ping the gateway.
I tried setting it so VLAN 1 trunks via TRK24 but still no luck
Maybe my trunks are messed up, which I think is the main issue. Does anybody know the solution to my problem? This is my first time configuring an HP switch.
Thanks for the responses
Cheers