Wired Intelligent Edge

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"

This is what I have in my configuration to send syslog to my logserver 192.168.2.50:

logging 192.168.2.50logging system-module snmplogging notify running-config-changelogging command

There are more categories, try logging ? to see everything.

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"

notice: Notice-Type='Running Config Change',Event-ID='82',Config-Method='MENU',

now i can see tihs log

This is what I have in my configuration to send syslog to my logserver 192.168.2.50:

logging 192.168.2.50logging system-module snmplogging notify running-config-changelogging command

There are more categories, try logging ? to see everything.

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"

but i can't see cli commands :D

notice: Notice-Type='Running Config Change',Event-ID='82',Config-Method='MENU',

now i can see tihs log

This is what I have in my configuration to send syslog to my logserver 192.168.2.50:

logging 192.168.2.50logging system-module snmplogging notify running-config-changelogging command

There are more categories, try logging ? to see everything.

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"

Seems that you use the menu to do configurations. Never tried, but it may be that in that case you don't see executed commands as there are no commands executed.

but i can't see cli commands :D

notice: Notice-Type='Running Config Change',Event-ID='82',Config-Method='MENU',

now i can see tihs log

This is what I have in my configuration to send syslog to my logserver 192.168.2.50:

logging 192.168.2.50logging system-module snmplogging notify running-config-changelogging command

There are more categories, try logging ? to see everything.

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"

How can I view the log of changes made from the menu, such as creating a new VLAN?

Seems that you use the menu to do configurations. Never tried, but it may be that in that case you don't see executed commands as there are no commands executed.

but i can't see cli commands :D

notice: Notice-Type='Running Config Change',Event-ID='82',Config-Method='MENU',

now i can see tihs log

This is what I have in my configuration to send syslog to my logserver 192.168.2.50:

logging 192.168.2.50logging system-module snmplogging notify running-config-changelogging command

There are more categories, try logging ? to see everything.

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"

Honestly, I would not know. I never use the menu. If no other responses come in, maybe ask TAC if they know or can find if that's possible.

How can I view the log of changes made from the menu, such as creating a new VLAN?

Seems that you use the menu to do configurations. Never tried, but it may be that in that case you don't see executed commands as there are no commands executed.

but i can't see cli commands :D

notice: Notice-Type='Running Config Change',Event-ID='82',Config-Method='MENU',

now i can see tihs log

This is what I have in my configuration to send syslog to my logserver 192.168.2.50:

logging 192.168.2.50logging system-module snmplogging notify running-config-changelogging command

There are more categories, try logging ? to see everything.

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"

How can I disable menu or cli menu on switch?

Honestly, I would not know. I never use the menu. If no other responses come in, maybe ask TAC if they know or can find if that's possible.

How can I view the log of changes made from the menu, such as creating a new VLAN?

Seems that you use the menu to do configurations. Never tried, but it may be that in that case you don't see executed commands as there are no commands executed.

but i can't see cli commands :D

notice: Notice-Type='Running Config Change',Event-ID='82',Config-Method='MENU',

now i can see tihs log

This is what I have in my configuration to send syslog to my logserver 192.168.2.50:

logging 192.168.2.50logging system-module snmplogging notify running-config-changelogging command

There are more categories, try logging ? to see everything.

Hi everyone,

I have 2930F switch, WC.16.07.0003 software version and graylog. I can forwarding cli commands but can't forwarding changes in menu . how can do this ?

I try "debug destination logging", "logging 10.10.10.10"