Hi Everyone,
Does anyone know how to enable the web interface on these switches ?
I can login via CLI from console port but would really like to be able to use the web interface. I must say that i've inherited these switches from a previous employee and there is little to no documentation as to how they were configured at install. They are currently part of the production environment.
I've used
_cmdline-mode on
To enable the system view and the extended menu's but the web option appears to be missing from the menu. Copy and paste of switch summary and full menu below, as you can see there is no Web option.
Current boot app is: flash:/S2900-CMW520-R1101P10.bin Next main boot app is: flash:/s2900-cmw520-r1101p10.bin
Next backup boot app is: NULL
3Com Corporation 3Com Baseline Switch 2952-SFP Plus Software Version 5.20 Release 1101P10 Copyright (c) 2004-2010 3Com Corp. and its licensors. All rights reserved. 3Com Baseline Switch 2952-SFP Plus uptime is 33 weeks, 6 days, 17 hours, 37 minutes
3Com Baseline Switch 2952-SFP Plus 128M bytes DRAM 128M bytes
Nand Flash Memory Config Register points to Nand Flash
Hardware Version is REV.B CPLD Version is 002
Bootrom Version is 119 [SubSlot 0] 48GE+4SFP
Hardware Version is REV.B
aaa Specify AAA configuration
acl Specify acl configuration information
archive Specify archive settings
arp Specify ARP configuration information
bootrom-update bootrom update
clock Specify the system clock
cluster Specify cluster configuration information
command-privilege Specify the command level
configuration Specify configuration settings
copyright-info Copyright information configuration
cut Cut connection
delete Delete function
dhcp DHCP configuration subcommands
dhcp-snooping DHCP Snooping
display Display current system information
domain Add domain or modify domain attributes
dot1x Specify 802.1X configuration information
execute Batch Command
file Specify file system configuration information
ftp Specify FTP configuration information
gratuitous-arp-learning Gratuitous Arp learning function
gratuitous-arp-sending Sending gratuitous-arp packet when receiving different sub-network arp packet function habp Specify HABP configuration information
header Specify the login banner
hotkey Specify hotkey configuration information
igmp-snooping IGMP snooping
info-center Specify information center configuration information
interface Specify the interface configuration view
ip Specify IP configurations for the system
job Schedule a system task
jumboframe Jumboframe command
lacp Configure LACP Protocol
lldp Link Layer Discovery Protocol(802.1ab)
local-user Specify local user configuration information
logfile Specify log file configuration
loopback-detection Detect if loopback exists
mac-address Configure MAC address
mib-style MIB style
mirroring-group Specify mirroring-group
multicast-vlan Multicast VLAN
ndp Neighbor discovery protocol
ntdp Specify NTDP configuration information
ntp-service Specify NTP(Network Time Protocol) configuration information
ping Ping function
pki Specify PKI module configuration information
port-group Port group
public-key Specify public-key module configuration information
qos Command of QoS(Quality of Service)
quit Exit from current command view
radius Specify RADIUS configuration information
return Exit to User View
rmon Specify RMON
save Save current configuration
sftp Specify SFTP service attribute
snmp-agent Specify SNMP(Simple Network Management Protocol) configuration information
ssh Specify SSH (secure shell) configuration information
ssl Specify SSL (Secure Socket Layer) configuration information
stack Switch stack system
storm-constrain Port storm-constrain
stp Spanning tree protocol
super Modify super password parameters
sysname Specify the host name
system-failure System failure handling method
system-guard System guard function
tcp Specify TCP(Transmission Control Protocol) configuration information
telnet Specify TELNET configuration information
temperature-limit Set temperature limit
tftp Specify TFTP configuration information
tftp-server TFTP Server
time-range Specify time-range configuration information
tracert Trace route function
traffic Specify traffic configuration information
undo Cancel current setting
user-group Specify user group configuration information
user-interface Configure the user terminal interface
vlan Configure VLAN
voice Specify voice VLAN
Any suggestions greatly appreciated
Regards
Jonathan
#EWS