Comware

I have just downloaded the software update package "S4500_s3n_3_03_02s56p06.exe" and applied it to a new 4500 (3CR17562-91) 50 port switch. Now when I use the Web interface I get the error message "There is no file flash:/s3p04_03.web on the Flash. Or the file does not match the software eunning on the device. The released package is s3p04_03.web"

Via the CLI a dir command displays this very file in I can see this very file "unit1>flash:/". I have deleted the file and re TFTP'd it with no change. WHat is the solution please.

Hi,

Did you find a solution for this? I have the exact same error after doing this upgrade on my 4500/ 26 port.

Thanks and regards


mat

Hi Mat,

No. I have searched and searched but found no answers. The switches (about 10) all perform fine and are still manageable.

Glen 

Hi Mat,

No. I have searched and searched but found no answers. The switches (about 10) all perform fine and are still manageable.

Glen 

 3.03.02p09 that is available now fixes this issue.

Thanks for the heads-up Nick.Lowe

Thanks for the heads-up Nick.Lowe