Comware

 View Only

  • 1.  5120-24G EI Switch-2 Slots (JE068A) and HP 5120 10GBASE-T Module (JG535A) compatibility

    Posted Jan 06, 2025 11:32 AM

    Hello all

    I used to have a HP 5500 2-port 10GbE Local Connect Module (JD360B) which was detected by the switch, it showed on the web management page and it was configurable. I have now replaced this module with an HP 5500\5120 10GBASE-T Module (JG535A) but this module does not seem to be detected and it does not show as configurable on the switch. 

    Do I need to update the switch software or is this module not compatible with this switch?

    Switch: JE068A

    Module: JG535A

    Switch software version: 5.20 Release 2208P01

    Thanks



  • 2.  RE: 5120-24G EI Switch-2 Slots (JE068A) and HP 5120 10GBASE-T Module (JG535A) compatibility

    Posted Jan 06, 2025 06:01 PM

    This switch is retired and should be replaced. Are you sure you ordered the correct module #0D1 or #B01?

    https://www.hpe.com/psnow/doc/c04111657.pdf?jumpid=in_lit-psnow-getpdf

    HP 5500/5120 2p 10GBASE-T Module JG535A • No Transceivers  See Configuration NOTE: 5, 6 

    Note 5 If factory intergrated into the switch, This Module must be ordered as #0D1 when the switch is not Factory Racked      

    Note 6  If factory intergrated into the switch, This Module must be ordered as #B01 when the switch is Factory Racked (Rack Level Integration CTO). 



    ------------------------------
    Marcel Koedijk | MVP Expert 2024 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
    ------------------------------

    Original Message


  • 3.  RE: 5120-24G EI Switch-2 Slots (JE068A) and HP 5120 10GBASE-T Module (JG535A) compatibility

    Posted Jan 07, 2025 08:38 AM

    (Last software version for 5120 is R2222P11 , available on HPE Networking Support Portal)

    5120.EI-4210G-4510G_5.20.R2222P11



    ------------------------------
    Frederic
    (kudos welcome)
    ------------------------------

    Original Message


Related Content