Hi
I recently had a problem with a module of a 5406. Module B was failed
5406# sh modules
Status and Counters - Module Information
Chassis: 5412zl J8698A! Serial Number:
Allow V1 Modules: Yes
Management Module: J8726A Serial Number: ID040AS0NM Core Dump: YES
Core Mod
Slot Module Description Serial Number Status Dump Ver
---- -------------------------------------- -------------- -------- ----- ---
A HP J9538A 8p 10G-GbE SFP+ v2 zl Module SG0507W008 Up YES 2
B Failed -
C HP J9534A 24p Gig-T PoE+ v2 zl Module SG0427R03V Up YES 2
D HP J9534A 24p Gig-T PoE+ v2 zl Module SG0487R09X Up YES 2
E HP J9534A 24p Gig-T PoE+ v2 zl Module SG0467R01S Up YES 2
F HP J9534A 24p Gig-T PoE+ v2 zl Module SG0467R028 Up YES 2
G HP J9534A 24p Gig-T PoE+ v2 zl Module SG0457R040 Up YES 2
After reload module B, all is OK.
But it is possible to monitor status of module with SNMP ?
With oid .1.3.6.1.4.1.11.2.14.11.1.2.3.1.4, I have description of each module but not status.
#snmp