Wired Intelligent Edge

 View Only

  • 1.  5412zl crashes every hour

    Posted Dec 22, 2010 11:37 AM

    I've got a HP Procurve 5412zl which reboots at exactly 1 hour intervals.

    When the crash occurs, CPU goes to 100% and Ping times are 2seconds+, then switch restarts.

    Running Software revision  : K.15.02.0005

     

    Saved crash information:
    NMI event HW:IP=0x01174330 MSR:0x02029200
     cr: 0x20000000 sp:0x0300f120 xer:0x00000
     Task='VxServer' Task ID=0xaad1000

    The switch is currently unused, so has minimal modules installed and almost no config!

    Any ideas?



  • 2.  RE: 5412zl crashes every hour

    Posted Dec 22, 2010 12:53 PM

    Hi,

     

    You can contact the Support to obtain the latest not Generally available version to check if it fix your behaviour.

     

    For troubleshooting steps.

    How many modules and what type is it ?

    Do you have any configuration ?

     

    Try to revert back the switch to default config, if the problem is not solved, then backward to your configuration.

    Try to remove every modules, but not the management, if it failed then this is your module, otherwise add one module, etc...

     

    You can try to test a different module in a slot where you identify the problem, this could be relevant to the slot itself.

     

    Good luck.



  • 3.  RE: 5412zl crashes every hour

    Posted Jan 05, 2011 05:15 AM

    hi,

     

    Do you have any news ? This for my knowledge.

     

    Bye.



  • 4.  RE: 5412zl crashes every hour



  • 5.  RE: 5412zl crashes every hour

    Posted Jan 06, 2012 09:53 AM

    You shoud update to new K.15.06.0008 because of any fix in K15.06.0007!



Related Content