Comware

 View Only

  • 1.  5500G-EI - cant apply ACL in VLAN Interface

    Posted Nov 04, 2009 05:41 AM
    I am having problem with applying advanced ACL into an VLAN interface.



    I read the manual that shows me to use packet-filter command to apply ACL to VLAN, but there is no such command available in system-view level.



    the current version of OS i'm using is V3.02.04s56, do i need to upgrade the OS for the switch 5500G-EI



    Appreciate if anyone can help and advice



  • 2.  RE: 5500G-EI - cant apply ACL in VLAN Interface

    Posted Nov 09, 2009 09:53 AM
    Yes, probably You need to upgrade your switch. I have 5500G with v3.03.02s168p01 and packet-filter is available in system-view.



    Upgrade is quite easy so it shouldn't be a problem for you.



  • 3.  RE: 5500G-EI - cant apply ACL in VLAN Interface

    Posted Dec 21, 2010 07:42 PM

    Different model of switch and software, but to apply an acl to a vlan interface on our device we use the following command, this is assuming the qos policy is already set up!

     

     qos vlan-policy <policy name> vlan <vlan ID> <direction>



Related Content