Comware

 View Only
Back to discussions
Expand all | Collapse all

[5500G-EI SFP] No outbound packet-filtering ???

This thread has been viewed 0 times

  • 1.  [5500G-EI SFP] No outbound packet-filtering ???

    Posted Nov 09, 2012 04:14 AM

    Hello,

     

    I try to isolate some multicast traffic, thus I made this rules :

    acl number 4000
     rule 1 deny dest 0300-0000-8000 ffff-ffff-8000

     

    acl number 4001
     rule 1 deny dest 0300-0000-0000 ffff-ffff-8000

     

    interface GigabitEthernet1/0/1
     packet-filter outbound link-group 4000

     

    but the switch does not accept "packet-filter outbound" sequence. When trying autocompletion, only inbound is proposed.

     

    Is it a known issue or a limitation ? Should I update the firmware ?

     

    Thanks for support

     

    Best regards

     

    Christophe

     

    Product Description:
    3Com Switch 5500G-EI SFP 24-Port Software Version 3Com OS V3.03.02s56p05
    System Location:      Marlborough, MA 01752 USA
    System Contact:      3Com Corporation.
    Serial Number:      9RXFC2PD58F80
    Product 3C Number: 3CR17259-91
    MAC Address:       00-24-73-D5-8F-80

    Software Version:  3.03.02s56p05
    Bootrom Version :  5.03
    Hardware Version:  REV.B

     



  • 2.  RE: [5500G-EI SFP] No outbound packet-filtering ???

    Posted Sep 06, 2013 12:08 AM

    Hi,

     

    I got no experience with this type of ACL, but were you able to solve it ?

     

    The 5500 I have been working with usually runs comware 5.20.

    I usually download it through the support portal:

    www.hp.com/networking/support

     

    If you switch is equal to HP 5500-24G-SFP EI Switch (JD374A) then there is comware 5.20 R2220P07.

     

    Cheers



Related Content