Image not present??
the commands that available are:
cpboot> ?
? - alias for 'help'
bank - show/set the current bootflash bank (partition).
boot_update - update bootloader image in boot flash
bootaos - boot from an AOS image in memory
bootf - boot from an AOS image from FLASH/External USB
def_part - set default FLASH boot partition
dhcp - boot image via network using DHCP/TFTP protocol
dir - list the files in external USB device (default /)
enablethermalsd - enablethermalsd - Generates a signal to the power manager to turn off all the DC-DC converters
fltest - fltest - test u-boot FLASH driver
format - format FLASH device
help - print command description/usage
lock - Perform flash protection of the selected sectors on boot FLASH
n2xx_vrm - n2xx_vrm - Show XLP VRM registers and state
osinfo - show the OS image version(s)
part - write a new DOS partition table to USB Flash
ping - send ICMP ECHO_REQUEST to network host
printenv - print environment variables
purgeenv - restore default environment variables
reset - perform RESET of the CPU
runelf - Run from an ELF image in memory
saveenv - save environment variables to persistent storage
setenv - set environment variables
tftpboot - boot image via network using TFTP protocol
upgrade - upgrade FLASH partition
Original Message:
Sent: Dec 09, 2022 07:20 PM
From: harendra nishshanka
Subject: 7005 Controller Image Issue
There are two partitions in all Aruba controllers, Primary and Secondary. you can change the boot partition from CLI
1. log in as the root user and enter the enable mode.
2. Type the following command:
boot system partition <partition ID>
------------------------------
Harendra
ACDX|ACEP|CWSP|
Original Message:
Sent: Dec 09, 2022 12:17 PM
From: laith mayyahi
Subject: 7005 Controller Image Issue
Our 7005 wireless controller image was deleted, how can I restore it or install the new one. How can we copy the image from one controller to another please