Comware

I am trying to set up link aggregation with load sharing. Every group I set up always shows it is set for NonS. Does any one know how to config this? Do you need the links connected before is will change the status? I have followed the instructions in the configuration guide and have even set up the ports with lacp enabled.



thank you,











ggregation ID: 1, AggregationType: Manual, Loadsharing Type: NonS

ggregation Description:

ystem ID: 0x8000, 0020-9c6b-3ec2

ort Status: S -- Selected, T -- sTandby

ocal:

Port Status Priority Flag Oper-Key Link-Status

-------------------------------------------------------------------------------

GigabitEthernet1/0/45 T 32768 0x00 3 Down

GigabitEthernet1/0/46 T 32768 0x00 3 Down



emote:

Actor Partner Priority Flag Oper-Key SystemID

-------------------------------------------------------------------------------

GigabitEthernet1/0/45 0 0 0x00 0 0x0,0000-0000-0000

GigabitEthernet1/0/46 0 0 0x00 0 0x0,0000-0000-0000

Try to view the interface attributes. To achieve loadsharing the member ports of the link aggregation must have the same attributes; this is SPEED, DUPLEX (full) and generic stting such as STP, VLAN, GVRP, QoS and VLAN-vpn configurations.

Thank you for replying. I had a vendor set this up but he has not had time to get it to work I thought I would thy to find out my self. I am going to support it any way.



Here is what I can find on the ports. It looks all the same. Is it possible that when I hook up the server to it the status will change?



#

interface GigabitEthernet1/0/45

stp edged-port enable

port link-aggregation group 1

#

interface GigabitEthernet1/0/46

stp edged-port enable

port link-aggregation group 1



both ports are on vlan 1 untaged.



display stp interface gi

display stp interface GigabitEthernet 1/0/45

Protocol Status :disabled

Protocol Std. :IEEE 802.1s

Version :3

CIST Bridge-Prio. :32768

MAC address :0020-9c6b-3ec2

Max age(s) :20

Forward delay(s) :15

Hello time(s) :2

Max hops :20

display stp interface GigabitEthernet 1/0/46

Protocol Status :disabled

Protocol Std. :IEEE 802.1s

Version :3

CIST Bridge-Prio. :32768

MAC address :0020-9c6b-3ec2

Max age(s) :20

Forward delay(s) :15

Hello time(s) :2

Max hops :20



display port vlan-vpn

No VLAN-VPN ports available!

Update, I go it working. It was not the switch settings but found a bad cable in the system not letting the port come up speed.



Thank you again for you help.