Comware

 View Only
  • 1.  A5800-24G-SFP

    Posted Jan 23, 2014 07:04 AM

    Good day, I am new to this but somehow we need to understand what I'm asking for your help!
    There A5800 as the core of the network connected to it many access switches division Vlan.
    for each vlan interface and its registered DHCP Relay 
    also manual routing table

    Problem as follows:
    1) if the IP address is registered on the client manually and the default gateway is not assigned IP interface Vlan it as well as the gateway can not see each other ping as the customer record is not in the ARP table.

    2) if you use a TRACERT from the client to any other IP outside their VLAN is ranked first HOP should be interface (A5800) and Statistics *** further all ok
    tracert 192.168.30.79
    traceroute to 192.168.30.79 (192.168.30.79) 30 hops max, 40 bytes packet, press CTRL_C to break
     
    1 ***
     2 
    192.168.30.79 2 3 ms 2 ms 2 ms

    3) it is possible from the point before going but felt very long delay in http connection

    Configuration file attached, in my opinion it has a lot of excess as yourself trying to figure it out

    I apologize if that is not clear, use the translator = \



  • 2.  RE: A5800-24G-SFP

    Posted Jan 24, 2014 04:39 AM

    hi vovan

     

    you have a strange configuration with arp restricted-forwarding, proxy-arp enable and ip irdp. May this cause the delays and invisible arp entries.

     

    for the tracert you have to enable "ip ttl-expire enable" on the switch.

     

    br

    Manuel



  • 3.  RE: A5800-24G-SFP

    Posted Feb 13, 2014 03:12 AM
    Thanks for the tip with the ip ttl-expire enable" this is what you need!
    I agree that it's very strange but after disabling these features have not changed anything...
    I removed from the configuration of a "dhcp relay address-check enable" to vlan interfaces and added, "mac authentication" with the service-type "lan access" then there were all ARP entries
    The problem with large delay is still there.
    in the configuration added "dns resolve", "dns server 192.168.1.5" name resolution: ping host.com watch a repeated and long-standing request to the dns server