Wired Intelligent Edge

 View Only
Back to discussions
Expand all | Collapse all

aaa authentication authorization and accounting on aruba cx

This thread has been viewed 27 times

  • 1.  aaa authentication authorization and accounting on aruba cx

    Posted Nov 03, 2021 12:46 AM
    Dear All,

    I want to migrate from cisco to aruba cx. For tacacs and aaa there are commands as below:

    aaa new-model
    aaa authentication login telnet group tacacs+ local
    aaa authentication login console group tacacs+ local
    aaa authentication enable default group tacacs+ enable
    aaa authentication ppp dialin group tacacs+
    aaa authorization config-commands
    aaa authorization exec telnet group tacacs+ local 
    aaa authorization commands 15 telnet group tacacs+ none 
    aaa authorization network default if-authenticated local 
    aaa authorization network dialin group tacacs+ 
    aaa accounting exec default start-stop group tacacs+
    aaa accounting commands 15 default start-stop group tacacs+
    aaa accounting network default start-stop group tacacs+
    aaa accounting connection default start-stop group tacacs+
    aaa accounting system default start-stop group tacacs+

    Does anybody know, what is the bolded command on aruba cx?

    Thanks and Regards,
    Gibs

    ------------------------------
    Luthfi Naufal Gibrani
    ------------------------------


  • 2.  RE: aaa authentication authorization and accounting on aruba cx

    Posted Nov 18, 2021 08:56 AM
    You have looked at https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c04793912 I suppose?
    Not sure if it is in there (and I did not check) but you might get lucky.

    ------------------------------
    Koen V
    ------------------------------

    Original Message


Related Content