Wireless Access

I need to add some new AP-303 to my mobility controller.
what are the steps to do this ?

i can access the web gui of the AP, after adding the controller IP address, i cannot see the AP in the controller

so are you saying that you have an Instant AP and you want to convert it to a controller based AP ?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------

Original Message:
Sent: Jul 12, 2022 05:21 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I need to add some new AP-303 to my mobility controller.
what are the steps to do this ?

i can access the web gui of the AP, after adding the controller IP address, i cannot see the AP in the controller

Yes, i have some spare IAP lying around for some time.
need to convert to controller based AP.
i connect them to my poe switch and are able to get DHCP ip address, what else i need to do ?
Original Message:
Sent: Jul 12, 2022 07:20 PM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

so are you saying that you have an Instant AP and you want to convert it to a controller based AP ?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 05:21 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I need to add some new AP-303 to my mobility controller.
what are the steps to do this ?

i can access the web gui of the AP, after adding the controller IP address, i cannot see the AP in the controller

here is the link to the relevant part of user guide.
https://www.arubanetworks.com/techdocs/Instant_87_WebHelp/Content/instant-ug/iap-mainten/conv-to-cap.htm

two things, you need to have: relevant Controller licenses and remember that all the APs in the Instant cluster will be converted to controller based APs.



------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------

Original Message:
Sent: Jul 12, 2022 11:45 PM
From: KM Yeow
Subject: Add AP-303 to mobility controller

Yes, i have some spare IAP lying around for some time.
need to convert to controller based AP.
i connect them to my poe switch and are able to get DHCP ip address, what else i need to do ?

Original Message:
Sent: Jul 12, 2022 07:20 PM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

so are you saying that you have an Instant AP and you want to convert it to a controller based AP ?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 05:21 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I need to add some new AP-303 to my mobility controller.
what are the steps to do this ?

i can access the web gui of the AP, after adding the controller IP address, i cannot see the AP in the controller

I don't see Maintenance -> Convert in my Controller.
my firmware version is ArubaOS_72xx_8.7.1.5_81372.

Original Message:
Sent: Jul 13, 2022 01:31 AM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

here is the link to the relevant part of user guide.
https://www.arubanetworks.com/techdocs/Instant_87_WebHelp/Content/instant-ug/iap-mainten/conv-to-cap.htm

two things, you need to have: relevant Controller licenses and remember that all the APs in the Instant cluster will be converted to controller based APs.



------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 11:45 PM
From: KM Yeow
Subject: Add AP-303 to mobility controller

Yes, i have some spare IAP lying around for some time.
need to convert to controller based AP.
i connect them to my poe switch and are able to get DHCP ip address, what else i need to do ?

Original Message:
Sent: Jul 12, 2022 07:20 PM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

so are you saying that you have an Instant AP and you want to convert it to a controller based AP ?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 05:21 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I need to add some new AP-303 to my mobility controller.
what are the steps to do this ?

i can access the web gui of the AP, after adding the controller IP address, i cannot see the AP in the controller

My screenshot is from the Instant AP WebUI.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------

Original Message:
Sent: Jul 13, 2022 02:46 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I don't see Maintenance -> Convert in my Controller.
my firmware version is ArubaOS_72xx_8.7.1.5_81372.

Original Message:
Sent: Jul 13, 2022 01:31 AM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

here is the link to the relevant part of user guide.
https://www.arubanetworks.com/techdocs/Instant_87_WebHelp/Content/instant-ug/iap-mainten/conv-to-cap.htm

two things, you need to have: relevant Controller licenses and remember that all the APs in the Instant cluster will be converted to controller based APs.



------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 11:45 PM
From: KM Yeow
Subject: Add AP-303 to mobility controller

Yes, i have some spare IAP lying around for some time.
need to convert to controller based AP.
i connect them to my poe switch and are able to get DHCP ip address, what else i need to do ?

Original Message:
Sent: Jul 12, 2022 07:20 PM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

so are you saying that you have an Instant AP and you want to convert it to a controller based AP ?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 05:21 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I need to add some new AP-303 to my mobility controller.
what are the steps to do this ?

i can access the web gui of the AP, after adding the controller IP address, i cannot see the AP in the controller

i managed to get another unit with newer firmware and managed to get it converted to AP mode.
now its showing at the controller side. 
how do i make changes to the settings of the AP ?
Original Message:
Sent: Jul 13, 2022 04:19 AM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

My screenshot is from the Instant AP WebUI.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 13, 2022 02:46 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I don't see Maintenance -> Convert in my Controller.
my firmware version is ArubaOS_72xx_8.7.1.5_81372.

Original Message:
Sent: Jul 13, 2022 01:31 AM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

here is the link to the relevant part of user guide.
https://www.arubanetworks.com/techdocs/Instant_87_WebHelp/Content/instant-ug/iap-mainten/conv-to-cap.htm

two things, you need to have: relevant Controller licenses and remember that all the APs in the Instant cluster will be converted to controller based APs.



------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 11:45 PM
From: KM Yeow
Subject: Add AP-303 to mobility controller

Yes, i have some spare IAP lying around for some time.
need to convert to controller based AP.
i connect them to my poe switch and are able to get DHCP ip address, what else i need to do ?

Original Message:
Sent: Jul 12, 2022 07:20 PM
From: Ariya Parsamanesh
Subject: Add AP-303 to mobility controller

so are you saying that you have an Instant AP and you want to convert it to a controller based AP ?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Jul 12, 2022 05:21 AM
From: KM Yeow
Subject: Add AP-303 to mobility controller

I need to add some new AP-303 to my mobility controller.
what are the steps to do this ?

i can access the web gui of the AP, after adding the controller IP address, i cannot see the AP in the controller