My company installed aruba AP505,535 and is using AirMatch function.
We noticed some APs seem that they don't accept AirMatch optimization and it causes channel overlapping at some campuses.
The debug log of improper APs are like this.
5GHz ap name AP1
------------------------------------------------------------------------------------------------------------
Time of Change Chan Bandwidth EIRP(dBm) Mode Source
------------------- ---------------- ------------ ------------ -------- -----------------------------
2025-04-16 05:01:02 116 ->60 20 ->20 21.0 ->15.0 AP ->AP Solver
2025-04-15 05:00:45 116 ->116 20 ->20 21.0 ->15.0 AP ->AP Solver
2025-04-14 05:00:45 116 ->120 20 ->20 21.0 ->15.0 AP ->AP Solver
then I found setting differences below between proper APs and improper APs.
- proper APs
show airmatch debug reporting-radio AP-NAME AP1
…
Radio Client Pref ALLOW_ALL
…
- improper APs
show airmatch debug reporting-radio AP-NAME AP2
…
Radio Client Pref ALLOW_ALL_SOLVER_ASSIGNED
…
What's the difference between these setting and are there any possibility this difference affects AirMatch?