The info from unauthenticated clients has less data from switch. So is the reason for some details not shown. For authenticated clients, you should be able to see most of the data. Also, is the reason not to show unauthenticated clients in Clients list page.
Original Message:
Sent: Apr 02, 2025 02:29 PM
From: eddie_ma
Subject: airwave / amp 8.3.0.4 - WIRED clients listing , to export/view ?
thnx, well i do see many 'wired' clients now.... missing a lot of the 'device atrributes' like you see with 'wireless / authenticated' stuff.... only like 20% of the info....so that's kind of a bummer.
Original Message:
Sent: Apr 02, 2025 12:52 PM
From: Gowri Amujuri
Subject: airwave / amp 8.3.0.4 - WIRED clients listing , to export/view ?
Hi,
Authenticated clients on the switch should show up in Client List page. When you add 'Connection Mode' option to the View for the client table and select wired , do see wired client?
Are the clients un-authenticated clients? If so, they only show up in Switch connected table and not under Clients. If you want to see unauthenticated clients in client page, select the option 'Annotate un-authenitcated clients' option to 'yes' under Group > Basic page. If there are multiple groups for the switches, you need to repeat the option to set to yes.
Once, the client are in the client > connected list, you can sort the view with 'connection mode' to wired to export. you can generate any client reports by using the connection mode type to get wired only clients report.
With the new views, we can select the columns, but not the type in column. If there's a AMP user with role for switch folders only, they can see only the wired clients.
------------------------------
Regards
Gowri Amujuri
Original Message:
Sent: Apr 02, 2025 11:30 AM
From: eddie_ma
Subject: airwave / amp 8.3.0.4 - WIRED clients listing , to export/view ?
good day folks
running AMP 8.3.0.4 , i am looking to view , get an export or report of WIRED clients that are connected thruoughtou the environment.... on switches which are AMP-config'd
from HOME -> CLIENTS -> ALL , this appears to be 'just' WIRELESS clients and not WIRED
if , in AMP, i go to a Switch, then Connected -> i see list of IP / mac-addr , and LLDP/CDP provided info as being reported to the switches....
what i'd like is the centralized list of ALL the various devices that are 'Connected' to switches...
is that possible ?
i also see that in same CLIENTS -> ALL (it shows Device View - All Clients , can i customize a New View to give WIRED devices only ? )
thnx for any feedback. did reach out to our regional S.E. to see if any assistance too
Ed