Wireless Access

 View Only

  • 1.  Amarrar MAC a um AP Aruba 505

    Posted Jan 08, 2026 10:56 AM

    Boa tarde pessoal, tudo bem?

    Alguém pode me ajudar, eu estou com um projetor e uma sala aqui na empresa, e na sala tem um AP Aruba 505, dentro sala proximo do projetor, porém não conecta nele, e sim no AP que fica fora da sala, tem alguma maneira de amarrar/fixar o MAC do projetor nesse AP da sala?



    -------------------------------------------


  • 2.  RE: Amarrar MAC a um AP Aruba 505

    Posted Jan 08, 2026 02:07 PM

    The client device itself makes the decision as to which AP to connect to.  You'd need to look at that device to see if there are any options for that.
    You might be able to influence the decision by making sure that the nearer AP has a stronger signal at the location that the projector is installed.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------



  • 3.  RE: Amarrar MAC a um AP Aruba 505

    Posted Jan 08, 2026 05:19 PM

    in addition see which band does your projector connect to? is it 2.4 or 5GHz then accordingly as Carson mentioned adjust the Tx power.

    Also what is the distance between the AP in the meeting room and the AP outside that the projector connects to?



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 4.  RE: Amarrar MAC a um AP Aruba 505

    Posted Jan 09, 2026 03:30 AM

    To add to what has been written already, if you need to force clients to a very specific AP, my 'solution' for this normally to create a dedicated SSID and broadcast that only on one radio (2.4/5GHz) on one single AP. Not really manageable at scale, but for exceptions may be acceptable.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



  • 5.  RE: Amarrar MAC a um AP Aruba 505

    Posted Jan 19, 2026 11:05 AM

    Boa tarde, tudo bem?

    Muito obrigado pelo retorno.

    -------------------------------------------

    Original Message


Related Content