Wireless Access

 View Only
Expand all | Collapse all

AOS 10 + 600 series + Poor Coverage - Random!

This thread has been viewed 6 times
  • 1.  AOS 10 + 600 series + Poor Coverage - Random!

    Posted Oct 03, 2025 04:51 AM

    I have a site that I am troubleshooting for. Coming from C, I cana assure you this would be a fw bug. I see no reason why it shouldn't be, but something is not sitting right. Hopefully some clever folk will assist.

    We have 634+antenna and 655s on site. AOs is 10.7.0.1_91033.

    This is across maybe 10-15 APs on a site of circa 200, that has been noted.

    An AP-X is Tx at 15dBm. Ekahau is showing an RSSI that is inline with what is expected on the 5GHz frequency. The ch is 60.

    AP-Y however, TX at 16dBm. RSSI is shocking everywhere. -65dBm where it should be -30-35 IMO. The ch. is 108. A reboot brought this AP online and operational. That was ch.44. Later in the day, (3-4 hrs) it changed to ch. 108 and was operating the poorly again. Same for 2.4GHz in the first instance. Unsure in the second. It is unlikely to be HW because it's one of MANY 655s. And the same is happening on different HW. The "only" stable thing to link the issue I have is the FW right now. The spectrum looks clean. The wiring is good. PoE is good.

    Any thoughts.

     


    -------------------------------------------


  • 2.  RE: AOS 10 + 600 series + Poor Coverage - Random!

    Posted Oct 03, 2025 05:23 AM

    your firmware is quite dated.

    it would be best to use 10.7.2.1 firmware

    check the release notes



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------