Wired Intelligent Edge

 View Only

  • 1.  AOS-CX Link transitions counter

    Posted Jan 08, 2024 04:18 AM

    Hello,

    Is there a way to:
    * monitor Link transitions via snmp
    * clear the link transitions counter

    Recently I had a problem with faulty optics which resulted in this:

    DC1-CORE2# show interface 1/1/2

    Interface 1/1/2 is up
    Admin state is up
    Link state: up for 3 days (since Thu Jan 04 13:22:11 CET 2024)
    Link transitions: 82263



    ------------------------------
    -- tommyd
    ------------------------------


  • 2.  RE: AOS-CX Link transitions counter

    Posted Jan 08, 2024 05:03 PM

    see if this helps

    ifLinkUpDownTrapEnable    OID 1.3.6.1.2.1.31.1.1.1.14



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------



  • 3.  RE: AOS-CX Link transitions counter

    Posted Jan 09, 2024 03:44 AM

    As name says this OID is to enable traps and its value is eiter 1 or 0. I am looking for OID which will show the counter  value, 82263 in this case.

    I've tried snmpwalk | grep 82263  and it did not show anything.



    ------------------------------
    -- tommyd
    ------------------------------

    Original Message


Related Content