It's the same principle. Put Aruba Instant image of your choice for platform Hercules to TFTP server and use upgrade os command to transfer it to AP.
for example your tftp server ip address is 10.0.0.10 and your image file is ArubaInstant_Hercules_8.9.0.3_83448 then you can upload the file as follows
boot> setenv serverip 10.0.0.10
boot> upgrade os 0 ArubaInstant_Hercules_8.9.0.3_83448
boot> boot
Hope this help, Gorazd
------------------------------
Gorazd Kikelj
------------------------------
Original Message:
Sent: Mar 22, 2022 01:55 PM
From: Michael Shuman
Subject: AP-304 will not boot.
I have been busy and just comming back to this. but the AP is to be used as an IAP and I do not have a controller.
Not sure how to send firmware directly to the AP.
------------------------------
Michael Shuman
------------------------------
Original Message:
Sent: Feb 28, 2022 03:40 AM
From: Gorazd Kikelj
Subject: AP-304 will not boot.
Hi Michael.
I described an upgrade procedure for AP if the OS image is broken or missing in this thread. AP-325 Missing OS Image
Best, Gorazd
------------------------------
Gorazd Kikelj