I am testing LACP striping in my lab environment running version 8.6.0.2. I have configured the ap system profile, the striping ip, and the ap group. The “AP LACP GRE Striping IP = 0.0.0.0” field in the “show ap debug lacp ap-name AP-2” output is the confusion. Should this field be 0.0.0.0?
********** vlan 10 configuration ********
(West-MD-1) #show ip interface brief | exclude unass
Interface IP Address / IP Netmask Admin Protocol VRRP-IP
vlan 10 10.0.10.2 / 255.255.255.0 up up 10.0.10.6
********** version information ********
(West-MD-1) #show switchinfo | include Version
ArubaOS (MODEL: Aruba7205-US), Version 8.6.0.2
********** vlan 10 configuration ********
(West-MD-1) #show ap debug lacp ap-name AP-2
AP LACP GRE Striping IP: 0.0.0.0 <====== Should this address be 0.0.0.0?
AP LACP Status
--------------
Link Status LACP Rate Num Ports Actor Key Partner Key Partner MAC
----------- --------- --------- --------- ----------- -----------
Up slow 2 17 534 54:80:28:b4:84:40
Slave Interface Status
----------------------
Slave I/f Name Permanent MAC Addr Link Status Member of LAG Link Fail Count
-------------- ------------------ ----------- ------------- ---------------
eth0 34:fc:b9:cf:4c:da Up Yes 0
eth1 34:fc:b9:cf:4c:db Up Yes 0
GRE Traffic Received on Enet Ports
----------------------------------
Zone Index Controller IP Enet 0 Rx Count Enet 1 Rx Count
---- ----- ------------- --------------- ---------------
0 0 10.0.10.2 0 0
0 1 10.0.10.4 0 0
GRE Traffic Sent on Enet Ports
------------------------------
Zone Index Controller IP Enet 0 Tx Count Enet 1 Tx Count
---- ----- ------------- --------------- ---------------
0 0 10.0.10.2 0 0
0 1 10.0.10.4 0 0
********** lms system profile configuration ********
(West-MD-1) #show ap system-profile west-System-Profile | include "LMS IP"
LMS IP 10.0.10.2
Backup LMS IP 10.0.10.4
********** ap group configuration ********
(West-MD-1) #show ap-group CX03-Lab | include West-System-Profile
AP system profile West-System-Profile
********** striping configuration ********
(West-MD-1) #show ap-lacp-striping-ip
AP LACP LMS map information
---------------------------
Parameter Value
--------- -----
AP LACP Striping IP Enabled
GRE Striping IP 10.0.10.3 LMS 10.0.10.2
******** LACP information from switche ********
Core-Switch# show lacp peer 11,12
LACP Peer Information.
System ID: 548028-b48440
Local Local Port Oper LACP Tx
Port Trunk System ID Port Priority Key Mode Timer
------ ------ ----------------- ----- --------- ------- -------- -----
11 Trk3 34fcb9-cf4cda 2 255 17 Active Slow
12 Trk3 34fcb9-cf4cda 1 255 17 Active Slow