Wired Intelligent Edge

 View Only
  • 1.  Aruba 1930 JL685A problem with SFP/GBIC

    Posted Oct 25, 2023 11:36 AM

    I have an Aruba 1930 JL685A switch, on SFP+ ports 49 and 50 I connected 2 GBIC D-NET DN-SFP-LX, third-party transceiver, the connection to the switch works on the network, the computers connected to it have access to the network, but on the Dashboard in the switch's web interface, both ports appear with the status DOWN, as it does not have a CLI, I cannot check if it has identified the GBICs.

    Device Information:
    Device information
    System Object ID
    1.3.6.1.4.1.11.2.3.7.11.199
    Software version
    2.6.0
    Operational system
    Linux4.4.120

    Is this due to using a third-party transceiver, lack of system update or some configuration?



  • 2.  RE: Aruba 1930 JL685A problem with SFP/GBIC

    Posted Oct 26, 2023 10:26 AM
    Edited by Zac67 Oct 26, 2023 10:58 AM

    The quickspecs and the Installation and Getting Started Guide list these gigabit SFP modules as compatible:

    J4858D - 1000BASE-SX
    R9D16A - 1000BASE-SX
    J8177D - 1000BASE-T
    R9D17A - 1000BASE-T
    J4859D - 1000BASE-LX10

    If your 3rd-party module doesn't mimic any of those it's not compatible, so it may be reject outright or might not work in a reliable way.




  • 3.  RE: Aruba 1930 JL685A problem with SFP/GBIC

    Posted Oct 27, 2023 02:33 PM

    I think it's the only way, I'm going to buy the J4859D - 1000BASE-LX10 transceiver and replace this D-NET.

    Thanks.




  • 4.  RE: Aruba 1930 JL685A problem with SFP/GBIC

    Posted Oct 27, 2023 09:00 AM

    You may better ask this question at the Aruba InstantON forum.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------