That should be possible with VLANs where you create one VLAN for ports 10-12-15 and the ISPb ; and another VLAN for all the other ports.
But you may have better visibility for this question on the InstantON forum, which covers that type of switch and people there can probably explain you how to configure this.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Feb 17, 2023 04:39 AM
From: diablex
Subject: Aruba 1930- using 2 different ISP on different ports
Hi,
I am a simple user of Aruba 1930 switch with minimum knowledge and experience.
I will try to explain my question:
The hardware and structure is:
1x Aruba 1930
3x AP11
2x ISP connections (1x radiolink cable (ISPa) going to router and then to 1930 switch- 1x 4G modem cable (ISPb) going to 1930 switch)
What I want to do:
port 10-12-15 are for AP11 access points. And I want to connect them to ISPb and the rest of ports to ISPa
is this possible with Aruba 1930 swtich?