Network Management

 View Only
Back to discussions
Expand all | Collapse all

Aruba 1930 using 2 different ISP on different ports

This thread has been viewed 3 times

  • 1.  Aruba 1930 using 2 different ISP on different ports

    Posted Feb 17, 2023 09:43 AM

    Hi,

    I am a simple user of Aruba 1930 switch with minimum knowledge and experience.

    I will try to explain my question:

    The hardware and structure is:

    1x Aruba 1930

    3x AP11

    2x ISP connections (1x radiolink cable (ISPa) going to router and then to 1930 switch- 1x 4G modem cable (ISPb) going to 1930 switch)

    What I want to do:

    port 10-12-15 are for AP11 access points. And I want to connect them to ISPb and the rest of ports to ISPa 

    is this possible with Aruba 1930 swtich?



  • 2.  RE: Aruba 1930 using 2 different ISP on different ports

    Posted Feb 20, 2023 09:08 AM

    Duplicate of this post.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


Related Content