Wired Intelligent Edge

 View Only
Back to discussions
Expand all | Collapse all

Aruba 2930f event log buffer 80% full - How to clear buffer

This thread has been viewed 16 times

  • 1.  Aruba 2930f event log buffer 80% full - How to clear buffer

    Posted Oct 17, 2023 03:47 AM

    Hello,

    we have a 2930f stack of two 2930f. FW is WC.16.11.0014.

    We got log information: Event log buffer 80% full

    How we can clear event log buffer and enable log rotate

    Best Regards,

    Matthias



    ------------------------------
    ZeitlerMatthiasmz@vfm-gruppe.de
    ------------------------------


  • 2.  RE: Aruba 2930f event log buffer 80% full - How to clear buffer

    Posted Oct 17, 2023 09:38 AM

    The event log buffer should rotate automatically and show just the most recent events (drop older events).

    You can clear the buffer with the command: "clear logging", but sometimes the 80% full message re-appears and a reboot of the switch removes it. But as the message is more cosmetic than impacting you can also ignore it. Or open a TAC case for further investigations.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


Related Content