Wired Intelligent Edge

On an Aruba 6300M switch, an interface connected to an access point shows 291 CRC errors. If I clear the statistics, the CRC counter gradually returns to 291 and does not increase beyond that. Is there any CRC threshold configured on the switch?

Hello,

For 8300 series an excessive CRC errors fault is reported when the number of ingress crc-error frames per 10,000 received frames exceeds the configured threshold value in a 20 second interval (did not find information about 6300 series)

Have you tested another interface to see if that changes anything?

I would recommend to open TAC case and try to figure out why 291 errors?!?! (and update if you/tac finds root cause)