Wired Intelligent Edge

 View Only

  • 1.  Aruba 8360-48XT4C Switch - use the 4 x QSFP/QSFP+ as SFP+ (10 G)

    Posted Mar 15, 2022 10:36 AM
    Hello,

    We have the Aruba 8360-48XT4C Switch that comes with 48 ports x 100/1000/2.5G/5G/10GBase-T and 4 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28

    My Question is can we you the 4 x QSFP/QSFP+ ports as 10 Gb SFP+ ports  ? 

    Best regards.



    ------------------------------
    Dram Zant
    ------------------------------


  • 2.  RE: Aruba 8360-48XT4C Switch - use the 4 x QSFP/QSFP+ as SFP+ (10 G)

    Posted Mar 15, 2022 12:26 PM
    Hello Sonbole,

    It seems that this specific model from 8360 line - 48XT4C ( JL706A/ JL707A)does not support split according to the following guide (836048XT4Cmodel QSFP28 ports do not support split-mode (hardware is not capable) p.40):

    https://www.hpe.com/psnow/doc/a00028947en_us

    You may check there for all options.
    Hope this helps!

    ------------------------------
    -Alex-
    ------------------------------

    Original Message


  • 3.  RE: Aruba 8360-48XT4C Switch - use the 4 x QSFP/QSFP+ as SFP+ (10 G)

    Posted Mar 16, 2022 04:07 AM

    There is a QSFP28 to SFP28 adapters, sold by HPE, which works in ports 50 and 51 on the Aruba 8360-48XT4C:

    HPE QSFP28 to SFP28 Adapter. SKU # 845970-B21

    It allows you to use 10G SFP+ or 25G SFP28 transceivers in ports 50 and 51.

    Doesn't work in ports 49 and 52, for some reason.

    No support for DAC cables.

    Transceiver guide: https://support.hpe.com/hpesc/public/docDisplay?docId=a00028947en_us



    ------------------------------
    Michael Fischer
    ------------------------------

    Original Message


Related Content