Hello All,
I am having a problem when configuring Point to Point link using AP-577. Here is what happen.
1- I have accessed both APs using the console and configured static IP address
2-I connect both APs to a switch on the same subnet. and reboot both AP
2- Logged in to the GUI and configured network, system and the APs and reboot. I did not enable the ether bridge yet. Both AP can be seen on the GUI
3- I enable ether bridge on the Point AP, and reboot the Point AP only and move it the remote switch
4- The link will never come up
5- When checking the Point AP, I found out the the Point AP is defaulted back to the default IP address and NOT the configured static address.
Would someone please help? Thank you so much for your though and direction. Best wishes!