Cloud Managed Networks

 View Only
Back to discussions
Expand all | Collapse all

Aruba Central New UI - Switch AOS-S

This thread has been viewed 11 times

  • 1.  Aruba Central New UI - Switch AOS-S

    Posted Jun 08, 2026 04:29 AM
    Edited by LP-24b107 Jun 08, 2026 04:56 AM

    Hi all,
    I'm trying to configure an Aruba 2930 switch using the Aruba Central New UI.
    The initial configuration seems to be fine: the switch is connected and has received several settings (VLAN, SNMP, port profiles, etc.).
    However, it now seems that the switch is not receiving configuration updates from Aruba Central.
    For example, I created a new port profile and assigned it to port 2. I waited for about 15 minutes, but the port on the switch did not apply the expected configuration.
    I also tried changing other settings (such as the SNMP community), but the configuration on the switch does not change.
    From the logs, it looks like the switch is connecting to Aruba Central and downloading the configuration (I think), but the running configuration never updates.
    I have already tried the following:
    1. Rebooting the switch 
    2. Forcing a sync using `active provisioning force` 
    3. Disabling and re-enabling Aruba Central (`hpe-anw-central disable/enable`) 

    Unfortunately, none of these actions resolved the issue.
    Could you help me identify what might be causing this problem?
    Switch version: WC.16.11.0030
    It looks like the configuration is being updated via SNMP, but changes are not applied to the running configuration.
    Last log from the switch (sanitized):
    I 06/08/26 08:24:20 system: Authentication state changed (credentials encryption toggled)
    I 06/08/26 08:24:18 system: Configuration hash calculation finished
    I 06/08/26 08:24:18 system: Configuration hash calculation started
    I 06/08/26 08:24:18 mgr: Startup configuration changed by SNMP
    I 06/08/26 08:24:14 ssl: SSL certificate detected (device certificate)
    I 06/08/26 08:24:14 ssl: User 'cloud' logged into SSL/TLS session
    I 06/08/26 08:24:14 amp-server: AMP server configuration disabled (initial setup)
    I 06/08/26 08:24:14 activate: Device provisioned with Aruba Central
    I 06/08/26 08:24:14 mgr: Startup configuration changed by SNMP
    W 06/08/26 08:24:13 central: Disconnected from Aruba Central (URL reconfiguration)
    I 06/08/26 08:24:13 activate: Trusted certificate received from Activate server
    I 06/08/26 08:24:13 activate: Connection successfully established with Activate server
    I 06/08/26 08:24:11 activate: Successfully resolved Activate server address


  • 2.  RE: Aruba Central New UI - Switch AOS-S

    Posted Jun 08, 2026 05:22 AM

    I was able to resolve the problem by doing the following:

     

    1. Creating a new group in Aruba Central 
    2. Moving the switches to the new group 

     

    After that, the switches downloaded and applied all configuration changes correctly.



Related Content