Cloud Managed Networks

So I have a stack of 8 2930Fs in Central as a template group.  There is a lot to be desired with adding a stack and managing it in any meaningful way, but anyway...

The stack has a template imported, I enabled central support mode on the switch to re-enable to CLI to make some configuration changes since JSON is waay too difficult to manage unless youve been specifically trained.

About an hour or so after adding changes in support mode, the switch keeps reverting to an old config. Is this central doing this? How can it do that when support mode is enabled, I thought that put the entire device in monitor only mode.

N

Some new features in Aruba Central (since your post) may change the way you work with it today.

Stacking of 2930Fs can now be configured in GUI mode - meaning you don't have to work in template mode, unless you require another feature not available in GUI mode.

Also, the Commit mode of a switch of group can be changed to stop Central from automatically pushing configuration down to the device(s).

https://help.central.arubanetworks.com/2.5.2/documentation/online_help/content/nms/cfg-audit/config-audit.htm?Highlight=commit