Wireless Access

Hello, i tried disabling this, but it says it didnt work.
Even i can see it disabled with the show adp config command, the adp and the igmp i disabled it and i see them disabled.  Still the AP which is on instant see the AP throught he Discovery protocol.   its a small lab which i have a gateway but i need to use one AP as instant for a lab 
The default gateway and the ip interface vlan its ont he gateway
Iam missing something else? 

I did factory reset on the AP and all the times it keeps going to the gateway even if the ADP is off.

Hi, Sorry, I didn't understand. What are you trying to achieve?

If the problem is that your Factory Default Instant AP converts to campus AP on a controller, it may help to check the UAP discovery steps and see what makes the AP discover your controller. Troubleshooting steps and how to override is also in that article.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------