Wired Intelligent Edge

Hi All,

Hope all are doing good!!

I have requirement  to monitor Aruba JL074A 3810M-Stack health which include when a commander ,standby or member goes offline /failed it would be assumed the stack member is missing.

I need your help to configure the SNMP trap in switch so that it will generate a alert in the monitoring tool

Any help much appreciated   

Thanks in advance

Debabrata

------------------------------
Debabrata Majhi
------------------------------

Hello, 

Please check if stacking traps are enabled on the switch with the following command.

Aruba-Stack-3810M# show snmp-server traps

If the current status is disabled you can enable it with the following command.


Aruba-Stack-3810M# configure
Aruba-Stack-3810M(config)# snmp-server enable traps stacking

If the status is enabled but you don't see any trap receivers you have to configure a trap receiver using the "snmp-server host" command explained in the following link.

https://techhub.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/15-18/5998-8160_ssw_mcg/content/ch06s10.html


------------------------------
Emil Gogushev
------------------------------