Security

 View Only

  • 1.  ArubaOS SWs radius configuration

    Posted Sep 10, 2021 08:35 AM
    Hello,

    I'd like to know if there is any way to configure an ArubaOS Switch to perform radius authentication using a radius server group and using a different radius server group to authenticate guest users..... Something similar to an WLAN controller, in a WLAN controller it's easier because you can configure corporative and guests networks in different SSIDs and you'll be able to configure different radius servers for each one.....

    Thanks in advance.

    Best regards.

    ------------------------------
    tech_sec
    ------------------------------


  • 2.  RE: ArubaOS SWs radius configuration

    Posted Sep 10, 2021 08:42 AM
    Unfortunately I do not believe this is doable. You can not assign authentication profiles per port. The RADIUS authentication would be global.

    ------------------------------
    Dustin Burns
    Senior Mobility and Access Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------



  • 3.  RE: ArubaOS SWs radius configuration

    Posted Sep 16, 2021 03:38 AM
    Thanks Dustin, 

    I supposed that, in the documentation is detailed that you can use a radius group for 802.1x and another one for MAC auth but it's not described any other way.

    Thanks a lot.

    ------------------------------
    tech_sec
    ------------------------------

    Original Message


Related Content