Do you have the IoT Configuration Guide for Assa Abloy - Zigbee? I think it is only available through Assa Abloy and Aruba. Your local Aruba SE can grab it from Arubapedia for you.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jul 28, 2023 08:30 AM
From: abdex
Subject: Assa Abloy ZigBee Network, IoT
Thanks Herman.
The controller and the assa abloy visionline server have established a handshake. What we're struggling with is our APs are not discovering the door locks (Zigbee clients).
Original Message:
Sent: Jul 28, 2023 08:23 AM
From: Herman Robers
Subject: Assa Abloy ZigBee Network, IoT
I see the server URL https://172.27.1.13/ in your configuration. Make sure that you have a trusted server certificate on that server 172.27.1.13, and the AP/controller has the root CA for that certificate trusted. Also, make sure that the IP is listed in the certificate, which is quite uncommon. Normally you would use the fqdn in the server URL. If the AP/controller cannot trust the server, the connection will not come up. You may try http:// (unsecure) if that works better.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Jul 27, 2023 05:31 AM
From: abdex
Subject: Assa Abloy ZigBee Network, IoT
(Aruba7205_63_74_EE) [mynode] #show iot radio-profile AssaIoT Radio Profile "ASSA"------------------------Parameter Value--------- -----Radio Instance internalRadio Mode ble zigbeeBLE Opmode beaconing scanningBLE Console onBLE Transmit Power 0Zigbee Opmode coordinatorZigbee Channel auto(Aruba7205_63_74_EE) [mynode] #show iot transportProfile AssaIoT Data Profile "ASSA"-----------------------Parameter Value--------- -----Server Type Assa-AbloyServer URL https://172.27.1.13/Access Token N/AClient Id N/AUsername symPassword ********Reporting interval 600Device Class Filter assa-abloyUUID Filter N/AMovement Filter 0Cell Size Filter 0Vendor Filter N/AUSB serial device type Filter N/AAge Filter 0Authentication URL N/AAuthentication Mode passwordUID Namespace Filter N/AURL Filter N/AAccess ID Assa-AbloyClient Secret N/AZigbee Socket Device Filter N/ARSSI Reporting Format averagechoose an environment type officeCustom Fading Factor 20Iot Proxy Server N/AIot Proxy User N/AAP Group ILRI OfficesSend device counts only DisabledEnable bleData forwarding for known devices DisabledEnable filtering for each frame received DisabledRTLS Destination MAC Address N/AData Filter N/AAzure DPS Id Scope N/AAzure DPS Auth Type N/AService UUID Filter N/ACompany Identifier Filter N/AMAC OUI Filter N/ALocal Name Filter N/A(Aruba7205_63_74_EE) [mynode] #show iot ser(Aruba7205_63_74_EE) [mynode] #show zigbeeservice-profile Show a ZigBee Service Profilesocket-device-profile Show a Zigbee Socket Device Profilesocket-inbound-profile Show a Zigbee Socket Inbound Profilesocket-outbound-profile Show a Zigbee Socket Outbound Profile(Aruba7205_63_74_EE) [mynode] #show zigbee service-profileASSA<profile-name> ZigBee service profile name| Output Modifiers<cr>(Aruba7205_63_74_EE) [mynode] #show zigbee service-profile ASSAZigBee Service Profile "ASSA"-----------------------------Parameter Value--------- -----Radio Instance allZigbee Security disableZigbee Trust Center Link Key N/AZigbee Permit Joining onPANID auto
Original Message:
Sent: Jul 27, 2023 03:50 AM
From: sdemets
Subject: Assa Abloy ZigBee Network, IoT
Hi,
Have you set "permit-joining on" in the zigbee service-profile?
This should allow your locks to join the zigbee network. There is also a CLI command to enable the network join to be enabled temporarily, although I don't remember it off hand.
Regards,
Steven
------------------------------
Steven Demets