Controllerless Networks

Hi,
When integrating Aruba mobility conductor (controller) with Cisco ISE (as RADIUS server), We need to change the MAC address format of Calling station ID from xxxxxxxxxxx to xx:xx:xx:xx:xx:xx, because ISE which running Cisco APs does not understand xxxxxxxxxxxx format very well.
Where in Conductor or Mobility controller can you change this?

thats a authentication server setting.


here is  the referance
https://www.arubanetworks.com/techdocs/ArubaOS_8.8.0_Web_Help/Content/arubaos-solutions/auth-servers/conf-radi-serv.htm

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Original Message:
Sent: Dec 21, 2022 01:22 PM
From: Moudar Shanta
Subject: Calling station ID

Hi,
When integrating Aruba mobility conductor (controller) with Cisco ISE (as RADIUS server), We need to change the MAC address format of Calling station ID from xxxxxxxxxxx to xx:xx:xx:xx:xx:xx, because ISE which running Cisco APs does not understand xxxxxxxxxxxx format very well.
Where in Conductor or Mobility controller can you change this?