what firmware is this switch running? have you contacted Aruba Support for it?
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------
Original Message:
Sent: Jul 17, 2023 08:54 PM
From: d4
Subject: Central pushing unwanted interface configuration
Hello, I have recently noticed when changing multiple port configurations from default to a trunk Native xx Allowed all it adds additional configuration. This is on a 6100 with very little configuration being pushed from the group. No spanning tree or 802.1x.
Any ideas?
///what I want ///
interface 1/1/48
no shutdown
vlan trunk native 320
vlan trunk allowed all
///// What is also added ////
spanning-tree port-priority 8
spanning-tree port-type admin-network
aaa authentication port-access client-limit 1
aaa authentication port-access dot1x authenticator
cached-reauth-period 30
quiet-period 60
reauth-period 3600
aaa authentication port-access mac-auth
cached-reauth-period 30
quiet-period 60
reauth-period 3600