AOS-CX Switch Simulator

Hello,
we have many 6200 cx and we are trying to change a vlan via snmp (v2 and v3) but without success (using Netdisco software).

we have many 26xx and 28xx hp switch and we are able to change vlan without any problem.

Reading the 6200 manual:
https://arubanetworking.hpe.com/techdocs/AOS-CX/10.12/PDF/fundamentals_6200.pdf

on page 16:

is it correct that AOS CX does not support snmpset command?

Thanks for your help.
Alex

Hi Alex, we did add SNMP write capabilities, specifically for VLAN changes, into the 10.12 Release.  Please have a look at the OIDs referenced below and check with Netdisco to see if they are using the same MIBs. 

SNMP write: VLAN write capabilities

Regards,
Corey

Hi Corey,
thank you for your help and your suggestions.
have a nice day
Alex