HI, i have a CISCO unmaneged AP (WAP321), that have the following feature, can I integrated this witrh clearpass guest solution.
| Interfaces | 10/100/1000 BASE-T autosensing (RJ45) |
| Powering Options | 802.3af Ethernet Switch, Cisco SB-PWR-INJ-12V-xx power Injector or Local Power Supply (SB-PWR-12V-xx) |
| Frequency | Selectable Band 2.4 GHz or 5 GHz ((not concurrent) |
| Wireless | 802.11n, 3x2 multiple input multiple output (MIMO) |
| Operating modes | Access Point mode, WDS bridging, Client Bridge mode |
| VLAN support | Yes |
| Number of VLANs | 1 management VLAN plus 4 VLANs for SSID |
| Multiple SSIDs | 8 |
| 802.1X supplicant | Yes |
| SSID to VLAN mapping | Yes |
| Auto channel selection | Yes |
| Spanning tree | Yes |
| Load balancing | Yes |
| IPv6 | Yes |
| Layer 2 | 802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN |
| Access control | Yes, management access control list (ACL) plus MAC ACL |
| Rogue access point detection | Yes |
| Quality of service (QoS) | Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) |
| Maximum AP’s per cluster | 8 |
| Active clients per cluster | 80 |
| Management protocols | Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
| HTTP redirect | Yes |
| Wireless isolation | Wireless isolation between clients |
| Roaming | Yes |
| Wi-Fi Multimedia (WMM) | Yes, with unscheduled automatic power save |
Regards
Andrea Acampa