Wired Intelligent Edge

Hi

I have basic roles on our 5400R switches sent from clearpass with a simple policy such as:

policy user "PERMIT-ALL"
     10 class ipv4 "IP-ANY-ANY" action permit

I would to see if I can expand that to create a network isolation type policy, let certain ip addresses through and block the rest.   I am unsure on how to program this.

Is there a guide or example I can follow - I haven't seen much information on it over the web so far.

Thanks

Here is a video (a little age but still accurate) from the Airheads Channel: AOS User Roles

But the config would likely look like something below:

class ipv4 "ALL"
1 match tcp any any
exit
class ipv4 "InternalDHCP"
1 match udp any any eq 67
exit
class ipv4 "InternalDNS"
1 match tcp any host 10.211.102.100 eq 53
2 match udp any host 10.211.102.100 eq 53
3 match tcp any host 10.125.105.100 eq 53
4 match udp any host 10.125.105.100 eq 53
exit
class ipv4 "InternalLAN"
1 match ip any 10.0.0.0/8
exit
policy user "Guest-Device-EW"
1 class ipv4 "InternalDNS" action permit
2 class ipv4 "InternalDHCP" action permit
3 class ipv4 "InternalLAN" action deny
10 class ipv4 "ALL" action permit
exit
aaa authorization user-role name "Guest-Device" policy "Guest-Device-EW"
exit

------------------------------
If my post was useful, please Accept Solution and Give Kudos.
------------------------------
Zak Chalupka
Principal Engineer - HPE Aruba
ACDX | ACMP | ACSP | ACCP
wifizak@hpe.com
------------------------------
Ideas expressed here are solely my own and not necessarily that of HPE Aruba.
------------------------------