Security

Hello all,

I would like to set up 802.1x with MAC Auth on our CX6300 switches, this works very well.
The switch should make a redirect on a reject to a captive portal of our clearpass, this also works.
Unfortunately I don't know how a service for wired captive portal on the clearpass should look like. Or I am also unclear what I have to set in the captive portal for the redirect where otherwise securelogin.arubanetworks.com.
Maybe someone has a detailed instruction or can give me some tips.

Thanks a lot

------------------------------
Tobias
------------------------------

when you create a weblogin for CX switches in order to do captive portal redirection and then guest login, you need to select Hewlett Packard Enterprise as vendor setting


you can refer to this technnote.
https://support.hpe.com/hpesc/public/docDisplay?docId=a00091135en_us

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------

Original Message:
Sent: Jun 01, 2022 04:06 AM
From: Tobias Gabriel
Subject: Clearpass wired captive portal service and redirect

Hello all,

I would like to set up 802.1x with MAC Auth on our CX6300 switches, this works very well.
The switch should make a redirect on a reject to a captive portal of our clearpass, this also works.
Unfortunately I don't know how a service for wired captive portal on the clearpass should look like. Or I am also unclear what I have to set in the captive portal for the redirect where otherwise securelogin.arubanetworks.com.
Maybe someone has a detailed instruction or can give me some tips.

Thanks a lot

------------------------------
Tobias
------------------------------