Wireless Access

 View Only

  • 1.  Conductor Dashboard shows wrong values

    Posted Jan 11, 2023 09:08 AM
    Hey Community,

    there is one Conductor with a Cluster of 4 MCs. (8.10.0.4)

    Dashboard only shows 23 APs and 4 clients connected. Reboot did not solve the problem. The APs are all connected to the same Controller.
    But on CLI all APs (~100) and all clients are shown.

    It's been a few months since the last update and I haven't noticed the incorrect display on the web GUI yet, so I can't say how long this error has existed.

    Using other browsers and removing all temporary-data did not solve the problem.

    Does anyone know the solution?

    Best regards,


  • 2.  RE: Conductor Dashboard shows wrong values

    Posted Jan 12, 2023 12:14 PM
    Hi magro.

    I read time before a similar issue for the clients: Aruba 7205 on 8.10.0.4 - Clients not aging out when disconnected | Wireless Access (arubanetworks.com)

    In the release notes of 8.10.0.5 refer to:

    AOS-237619
    The Dashboard > Overview > Wireless Clients page of the WebUI
    displayed an incorrect number of clients. This issue occurred due to
    a race condition. The fix ensures that the WebUI displays the correct
    number of clients. This issue was observed in Mobility Conductors
    running ArubaOS 8.10.0.2 or later versions

    But if this issue is only with the APs, I recommend you open a TAC case.

    I hope this help you.
    Original Message


Related Content