Controllerless Networks

 View Only
Back to discussions
Expand all | Collapse all

Configuring a point to point Mesh link in Aruba Central

This thread has been viewed 21 times

  • 1.  Configuring a point to point Mesh link in Aruba Central

    Posted May 22, 2018 12:47 PM

    Hello

     

    I have tested a p2p mesh link between an IAP 305 and 303H using Aruba Central.

    Internet -> Switich -> IAP305 ---- Mesh Link ---- AP303H --- Client

     

    Here is the step by step guide:

     

    1. Connect both APs to the same L2 network (same VLAN):central Mesh 1.png

     

     

     

     

     

     

     

    2. Upgrade firmware to recommended release:

    Central Mesh2.png

    3. Disable "Extended SSID":

    Central Mesh3.png

    4.  Disconnect the AP 303H and wait 5 minutes, AP will connect via Mesh.  Mesh, by default within IAP, will share the 5Ghz for backhaul and client access.

    Central Mesh 5.png5. Test WiFi, it works!

     

    Regards,

    Adolfo



Related Content