Network Management

Hi,

What are the steps for setting up Rogue detection in Airwave?

I am wanting to add four SSIDs = Staff / Student / Guest / Devices and have Airwave notify me if there is a ROGUE device spoofing these four SSIDs.

Any steps would be greatly appreciated as I can't seem to find the correct solution in the documentation.

Thanks.

Did you see this post? With controllers you may need the RFProtect license for that and enable the Valid SSID Misuse signature in the wireless IDS.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------

Hi Herman,

The link embedded on the page you sent does not work.

Do you have any instructions on how and what to do?

Original Message:
Sent: Feb 14, 2024 08:58 AM
From: Herman Robers
Subject: Detecting Rogue APs - Spoofing

Did you see this post? With controllers you may need the RFProtect license for that and enable the Valid SSID Misuse signature in the wireless IDS.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------

The article is 8 years old and documentation has moved. Here is the current location for the Airwave RAPIDS documentation as of February 2024.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------

Original Message:
Sent: Feb 18, 2024 05:42 PM
From: hilla
Subject: Detecting Rogue APs - Spoofing

Hi Herman,

The link embedded on the page you sent does not work.

Do you have any instructions on how and what to do?

Original Message:
Sent: Feb 14, 2024 08:58 AM
From: Herman Robers
Subject: Detecting Rogue APs - Spoofing

Did you see this post? With controllers you may need the RFProtect license for that and enable the Valid SSID Misuse signature in the wireless IDS.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.