Cloud Managed Networks

Hello all,

My client called me 4 hours ago that he is trying to make vlan configurations into switch ports and when he selected the right stack from Central and opened up Device->Ports and link aggregations page to make changes he saw port configuration of totally different device. That was easy to see because right ports should have port authentication via mac and access vlan 1 in all three (3) stack members but what he saw was single switch with static vlan configurations.

I checked out situation in 15 minutes later and saw same thing: Central was showing single device with certain vlan access configurations without mac authentication configurations..
I logged into switch console and from console all was like it should be (mac auth in ports and all such stuff...)
I enabled aruba support mode and made changes needed and "wr me" so that client can proceed with their work.

I came back to office and started to check this one out and noted that everything was now ok in Central view (!!??!!) and from Audit trail I can see that configuration is from totally different switch:

********************* 

(119 ending switch is right name and 200 is wrong)

Anybody else suffered such situation?? Cannot be about user or browser cache thing because of two different users and two totally different browsers...