Network Management

 View Only

  • 1.  Device/Feature support for HP devices in HP IMC 5.1

    Posted Mar 07, 2013 03:57 AM

    Hello eveyone,

     

    I recently purchased IMC 5.1 and also planning for  some HP devices which has full support in HP IMC 5.1(Couldnt take risk ;) ) . Do anyone has any document to share on this?

     

    I got one for PCM  http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02664017/c02664017.pdf

     

    But couldnt get any for IMC.

     

     

    Cheers,

    Nithish.

     


    #devicesupportimc


  • 2.  RE: Device/Feature support for HP devices in HP IMC 5.1

    Posted Mar 07, 2013 04:32 PM

    There is no published document covering device support.

     

    There are internal-only documents that list device support. Log a support case with the specific devices in question, and HP will tell you what level of support they have.

     

    Or just post the models here, and people might be able to tell you if they have them working properly in IMC.



  • 3.  RE: Device/Feature support for HP devices in HP IMC 5.1

    Posted Mar 08, 2013 06:04 AM

     HI,

     

    Can i know IMC support for the following devices.

     

    1. A-series 10500

    2. HP E5400
    3. HP E8200 switches

    4. cisco Nexus 7k

    5. cisco Nexus 1k

    6. Cisco 2800 ISR

    7. HP 5406zl

     

    Thanks in Advance.

     

    Regards,

    Nithish.

     



  • 4.  RE: Device/Feature support for HP devices in HP IMC 5.1

    Posted Mar 08, 2013 03:35 PM

    All of those should be fine, except for the Nexus kit - I've seen IMC working with HP Comware and ProCurve kit, and Cisco 28xx and 29xx routers and Cisco IOS switches.

     

    IMC 5.2 (released a couple of weeks back) now supports the Nexus 1K. I don't know about the Nexus 7K.

     

    If you haven't already, I would recommend upgrading to IMC 5.2.



Related Content