Wired Intelligent Edge

hello everybody

I have Hp 2920-24 switch, I am creating 2 Vlans as shown in the attached document . i have a DHCP server connected to the Vlan 20.

but iam not able to get ip from the vlan 10.

Thank you

Attachment(s)

switch.txt   703 B 1 version

You say your DHCP server is in VLAN20, but your IP helper address points to an address in VLAN10....

Also, nothing on VLAN1 will get an address because the VLAN1 interface is not doing any routing.