Comware

 View Only
Back to discussions
Expand all | Collapse all

Disable MSTP SNMP messages for specific interfaces (1920)

This thread has been viewed 1 times

  • 1.  Disable MSTP SNMP messages for specific interfaces (1920)

    Posted Oct 18, 2016 05:36 AM

    How do I disable MSTP SNMP messages for specific interfaces?

    I have the following interace configuration:

    interface GigabitEthernet1/0/10
    description End User Client
    port access vlan 60
    undo enable snmp trap updown
    undo enable log updown
    loopback-detection enable
    stp edged-port enable
    port-security max-mac-count 1
    port-security port-mode autolearn
    port-security intrusion-mode disableport-temporarily
    port-security mac-address security aaaa-aaaa-aaaa vlan 60

    but I get the following in the log each time the port goes up/down...

    %Oct 17 07:15:57:017 2016 SWITCH23 MSTP/6/MSTP_FORWARDING: Instance 0's port GigabitEthernet1/0/10 has been set to forwarding state.
    %Oct 17 07:15:57:018 2016 SWITCH23 MSTP/6/MSTP_FORWARDING: Instance 1's port GigabitEthernet1/0/10 has been set to forwarding state.

    Globally, I have ""stp bpdu-protection" set.

    I dont want to disable the MSTP messages globally as these are very useful for the uplinks etc., I just dont need them on the interfaces with PC;s/phones etc connected.

    Any help would be most welcome.



Related Content